Skip to content

Mühendisler Elektrik San. ve Tic. Ltd. Şti.

Default screen resolution  Wide screen resolution  Increase font size  Decrease font size  Default font size 
You are here:    Homepage arrow ITALCOPPIE arrow Evoluted sensors arrow EVOSER-T
EVOSER-T
TEMPERATURE SESNOR WITH INTEGRATED MODBUS RTU INTERFACE
High accuracy temperature sesnor with digital RS485 interface that permits the connection of several probes on the same line

Technical data




Working environment specifications Temperature: -20°C÷65°C
Humidity: 0÷100% RH
Tightness: IP67
General specifications Power supply: 12÷30Vcc
Internal consumption:0,25W without Display - 0,5W with Display
Input signal dynamics: 15 bit
Housing material:Nylon grey
Probe material: AISI 316 s.s. (ø3, ø6 and Lenght 10, 100, 250, 500 mm)
Optional display 4 digits, 7 segments, H8mm, red
Serial interface RS485
Max. distance between master and last device: 1200 m.
Max. number of device on network:32
Communication protocol Modbus RTU slave
Settable baud rate from 2.400 to 38400bps
Sensor RTD Pt1000 manufactured using magnesium oxide insulated formable cable (MgO)
Minimum bending radius: 3 times the oute diameter (except the sensing tip of lenght is 30 mm)
Accuracy See above data sheet
Output connector Nr. 2 connector M12x1 male in accordance with VDE0627
Resolution 0,1°C
Measurement range -50°C ÷ 450°C
Evoser parameter Temperature
Low/High temperature peak
Temperature bias to adjust the measure
Sensor programmation By Evoser SET kit
Link Evoser to Evoser As accessorie are available different lenght extension cables 4 poles + shield (2 poles for power supply, 2 Twisted poles for RS485 signal, shield) with M12-5 poles connector body in moulded Nylon
 
< Prev   Next >