| TEMPERATURE
RTD PROBE WITH INTEGRATED M12 CONNECTOR AND 4 ÷ 20mA OUTPUT |
|
| High accuracy and set up by software. The
trasmitter and the probe are integrated in one device
|
|
|
|
| Technical data |
|
|
|
|
|
|
| Absolute accuracy |
<=0.1% of
span (more than 0.3°C) |
| General
specifications |
Supply Voltage:
8 ÷ 35Vdc
Internal consumption: 25mW ÷ 0.8W
Signal/noise ratio:
Min. 60dB
Input signal dynamics: 19 bit
Output Signal dynamics: 16 bit |
| Temperature
coefficient |
<=0.01% of
span / °C (more than 0.01°C / °C) |
| Working environment
specifications |
Temperature:
-40°C to +85°C
Humidity: 0/100% RH
Tightness IP67 |
| Observed authority
Requirements |
- EMC
89/336/EEC - Emission EN 50 081-1 - EN 50 081-2, Immunity EN 50 082-2,
EN 50 082-1 |
| Effect of supply
voltage variation |
=0.005% of span
/ VDC |
| EMC immunity
influence |
<=0.5% of
span |
| Input |
RTD Pt100 srew
in probe for direct immersion with 1/8' GAS process connection.
Available immersion lenght 13 or 24 mm.
Temperature measurement
range: -50°C ÷ + 120°C |
| Output |
Signal Range: 4
÷ 20 mA
Updating time: 135 ms
Output connection M12x1 male in
accordance with VDE0627 |
| Sensor error
detection |
Programmable:
3.5...23 mA
NAMUR NE43 Upscale: 23 mA
NAMUR NE43 - Downscale: 3.5
mA |
| Process connection |
1/8" GAS
thread, according to UNI-ISO 228 | |
|
ITALCOPPIE 
