Skip to content

Mühendisler Elektrik San. ve Tic. Ltd. Şti.

Default screen resolution  Wide screen resolution  Increase font size  Decrease font size  Default font size 
You are here:    Anasayfa arrow SCANCON arrow Wind Power Heavy Duty
Wind Power Heavy Duty
Wind Power Heavy Duty-Wind Power Heavy Duty

Shaft

SCA115
   
Flange diameter: Ø115
Heavy Duty shaft encoder for Wind Power
Shaft Ø11
Shaft loads, Axial 250 N, Radial 250 N
IP Rating 65 to 67
Pulses 1 to 12500
Frequency: Max 300 kHz or max 3000 rev. / min
SCA115.pdf
2RHDS
   
Dimensions: 95 x 70 x 70 mm
Heavy Duty shaft encoder
Shaft Ø12 to 15
Shaft loads, Axial 250 N Radial 500 N
IP Rating 65 to 67
Pulses 1 to 12500
Frequency: Max 300 kHz or max 3000 rev. / min
2RHDS.pdf

Coc-SC50.pdf
2RMHD
   
Dimensions: 70 x 60 x 60 mm
Heavy Duty shaft encoder
Shaft Ø15
Shaft loads, Axial 250 N Radial 250 N
IP Rating 65
Pulses 1 to 7500
Frequency: Max 300 kHz or max 3000 rev. / min
2RMHD.pdf

Coc-SC24.pdf
2RCI
   
Dimensions: 115 mm
Heavy Duty shaft
encoder Shaft Ø12 to 15 Shaft loads,
Axial 250 N Radial 500 N
IP Rating 65 to 67
Pulses 1 to 12500
Frequency: Max 300 kHz or max 3000 rev. / min
2RCI.pdf
2Q
   
High Shaft loads encoder
Flange 2,5" x 2,5" / 63,5 x 63,5 mm
Shaft Ø6,35 (1/4") to 10
High Shaft loads, Axial up to 50 N
Radial up to 100 N
Pulses 1 to 12500
Frequency: Max 300 kHz or max 6000 rev. /min.
2Q.pdf

Couplings...>>>
Connectors...>>>
Measuring Wheels...>>>
2RHIDS
   
Dual shaft encoder, with measuring wheels
High Shaft loads encoder
Flange Ø68
Shaft Ø9,525 (3/8")
High Shaft loads, up to 50 N
Pulses 1 to 9000
Frequency: Max 300 kHz or max 3000 rev. / min.
Operating temperature: -40 to +75 degrees Celsius
2RHIDS.pdf

 Hollow Shaft

SCH94
   
Flange diameter: Ø94
Heavy Duty Hollow shaft encoder mainly for Wind Power
Hollow Shaft Ø16 mm or Ø17 mm
Shaft loads, Axial 200 N, Radial 400 N
Heavy duty ball bearings
IP 66 ( IP 65 & 67 options )
Built-in Transient Suppression module
SCH94.pdf
SCH68F
   
Heavy Duty hollow shaft encoder (blind end)
Hollow shaft up 25,4 mm ( 1 inch)
Flange diameter Ø68
Shaft loads, up to 100 N
Pulses 1 to 12500
IP-rating 65 to 67
SCH68F.pdf

Coc-SC68.pdf
SCH68B
   
Heavy Duty hollow through shaft encoder
Hollow shaft up 25,4 mm ( 1 inch)
Flange diameter Ø68
Shaft loads, up to 100 N
Pulses 1 to 12500
IP-rating 65 to 67
SCH68B.pdf

Coc-SC68.pdf

Fiber Optic Transmission up to 2000 meters

SCH94FO
   

Built in Transmitter
Hollow Shaft Fiber Optic Encoder–Ø94 mm
Dual Output Option (Digital & Fiber Optic)
Fiber Optic Transmission up to 2000 meters (~1.25 miles)
No Degradation of Encoder Signal from Electrical Disturbances
High Encoder Frequency and Low Transmission Delay
Added Safety by use of two Redundant Fibers
Built-in Transient Suppression Module

SCH94FO.pdf
DINJB-RX.pdf
DINJB-RX
   
Receiver for SCH94FO or DINJB-TX
Fiber Optic Transmission up to 2000 meters
No Degradation of Encoder Signal from Electrical Disturbances
High Encoder Frequency and low Transmission Delay
Added Safety by use of two Redundant Fibers
Compatible with all Scancon Fiber Optic Transmitters for Incremental Encoders
DIN Rail Mounting
DINJB-RX.pdf
DINJB-TX
   

External transmitter connect with any scancon encoder.
Fiber Optic Transmission up to 2000 meters
No Degradation of Encoder Signal from Electrical Disturbances
High Encoder Frequency and low Transmission Delay
Added Safety by use of two Redundant Fibers
Compatible with all Scancon Fiber Optic Receivers for Incremental Encoders
DIN Rail Mounting

DINJB-TX.pdf